The solid model was established by the efficiency was greatly improved, Surpac and Zhongwang CAD software, and the middle and deep hole design was carried out by using surpac software .According to the parameters of hole network of scheme 1 and scheme 2, the industrial test is carried out. After

Taking the highway project as an example, the blasting scheme and blasting parameter design are first analyzed, and then the blasting construction technology of high rock slope is studied from the aspects of rock drilling, hole testing, charging, blocking, detonation network connection

Brand : EPIROC
Part No. : 3128306180
Description : Holder
Use in : Boltec 235 , Boltec 235h , Boltec Lc , Boltec Md , Boomer 281 , Boomer 281dh , Boomer 282 , Boomer 353 , Boomer K111 , Boomer L2c , Boomer L2d , Boomer M2d , Boomer S1d , Boomer Xe3 , Boomer Xl3 , Roc D55 , Roc D65 , Roc D7 ...

Artificial shaft sinking has problems such as high construction risk，slow construction progress and poor construction effect.In order to adapt to the concept of mine safety development and improve the safety and efficiency of the mine building construction patio，the mechanical construction cut patio

With the coal mine gradually moving towards deep mining, the increase of rock burst on the roof and floor of the roadway is followed by the increase of tunneling risk and low tunneling efficiency of hard rock roadway, and the existing roadway deformation is increased, roof caving is prominent and

In the construction of highway tunnel projects, drilling and blasting is the most widely used construction technology. Its main principle is to use explosives to blast for excavation. In the charging process, blasthole drilling is an important part. The use of intelligent rock drilling rigs can

The SimbaH1354 full hydraulic top hammer medium-deep hole drilling trolley produced by Atlas Copco of Sweden adopts EDS electrical direct control system, 12VDC proportional amplifier and potentiometer-controlled electromagnetic proportional control valve for rock drilling propulsion system, and

Brand : EPIROC
Part No. : 3128314094
Description : Cradle Plate
Use in : Simba H1257 , Simba S7d

The article covers certain improper methods and their harm during the operation and maintenance of Boomer 282 Drilling Rig from Epiroc, in order to catch equipment management personnel and operators attention and take some measures to correct.

In order to actively promote the work of "mechanized substitution, automation and reduction" in the field of construction, the full hydraulic computer-guided three-arm rock drilling rig equipment was launched to replace the traditional manual hand-held pneumatic drilling rig excavation and blasting